How to save water in an apartment: 9 ways

When paying for utilities, most Russians are faced with the fact that upon receipt of a bill for water is higher than other payments. As a result of this, many housewives clutch their heads, not knowing what to do. High housing costs hit the budget of the family. The main water-consuming appliances are the toilet, bathtub, washing machine, heating boiler, dishwasher, heated floors. Consider the current ways to save, give practical recommendations.

Method number 1. Saving toilet water

The toilet is rightfully considered the leader among other water-consuming appliances. You will notice that while saving water in this room, costs will be significantly reduced.

1. Pay attention to whether the toilet has leaks at the joints with other units. If any are found, fix the problem immediately. In terms of fluid flow, such defects can be compared with an open tap.
2. Leading manufacturing companies have taken care of saving water in the toilet room. They developed a toilet flush that is controlled by two buttons. The first lowers the tank completely, the second only half. Take advantage of this.
3. There is another simple way to save. Reduce the volume of the barrel with a liter water bottle. Fill the container with liquid and place in the cavity of the toilet. The tank will fill up faster, which means that the water flow will be significantly less.

Method number 2. Saving water in the bathroom and shower

1. When people carry out hygiene, the priority is to save hot, not cold water. To achieve maximum results, you need to exclude frequent bathing in the bath. Give preference to the soul, as the water flow in this case is significantly reduced.
2. During water procedures with an average pressure, approximately 13-14 liters are consumed. fluid per minute. A quarter-hour shower spends much less water than a full bath. There are also many shower heads for the tap, which, in turn, are designed to save water. Installing lotions will reduce consumption to 5-6 liters per minute. The principle of operation of the nozzle is quite simple: water is scattered inside the device, so the process does not deteriorate.
3. Put a mixer with one lever, which immediately mixes 2 streams of water (hot and cold), minimizing consumption. Visually put a memo on saving water in the house. This will serve as a constant reminder for households, who often do not seek to save family funds (younger generation).
4. Remember to shut off water when not in use. This must be done at the time of brushing, shaving, rinsing the mouth, washing with a scrub and other cosmetic procedures. If we talk about indicators, the above methods can save up to 12 cubic meters of water per year.

Method number 3. Economical water consumption when cooking and washing dishes

1. Housewives wash the dishes every day, in this case, an important aspect is saving hot water. For example, dishwashers, despite their impressive size, can save up to 13 times the liquid consumption. For a manual sink, about 50 liters are required, and when using a dishwasher, only 15 liters with a considerable amount of dishes are required.
2. There is also a special nozzle on the tap, which separates and sprayes water, mixes it with air, thereby reducing consumption.Try to wash the dishes in two stages: first, thoroughly soap the dishes and remove the remnants of food in a separate basin or more often. Then rinse thoroughly with a fine stream of water.
3. To use purified water, installing the filter directly on the tap itself is suitable. The method is considered much more effective than in the case of a separate jug. In the process of cooking, immediately clean all the necessary vegetables, then wash them in one fell swoop.

Method number 4. Reduced water consumption during cleaning and washing

1. When washing clothes, try to load the maximum number of things. Keep your wet cleaning schedule to a minimum. Choose shorter programs on the typewriter (about 15 or 30 minutes), they should be suitable for the type of product (silk, cotton, wool, linen, etc.).
2. As mentioned earlier, when the tap is open, more than 12 liters of water flow out per minute. When cleaning an apartment, do not forget about this aspect. Turn off the tap every time you rinse the rags. After a month, you will clearly see how the cost of water decreased on the issued receipts.
3. Pay attention to the presence of pump rooms / wells near the place where you live. Use additional sources of water, do not neglect them. Such a move will help you clean up at no extra cost. Few know, but well water in most cases is much better than the well-known bottled water.
4. People living in private homes should pay attention to the rain ebb. As a rule, the device is installed under the roof. When a large amount of precipitation falls, accumulate them in buckets or tanks. After that, pour rainwater on the plants or use the composition for rough washing the car.

Method number 5. Saving water with water meters

1. To save water with the meters installed in the apartment, it is important to identify the number of registered citizens and the number of people living in fact in a particular room. As a rule, installation of water meters is considered illogical if a large family lives in the apartment and is not registered here.
2. Depending on the type of structure, about 175 liters per person living. per day, which is equivalent to 525 liters. liquids for a family of 3 people. For this reason, the installation of water meters is unprofitable if the dwelling is used for rent to tenants (tenants).
3. Water saving will be significant only if, for example, 5 people are registered in the apartment, and in fact three live. If you decide to install meters, before the procedure, calculate the actual consumption per person, only then make a decision.
4. If you two have about 150 liters. per day, it makes sense to install water meters. Such a move will significantly save the family budget, because, in fact, about 175 liters are allocated for one resident. water

Method number 6. Save water by checking for leaks

1. If you have decided to save water, the first thing to do is to do a trivial check for leaks. Inspect the entire plumbing and water main for visible damage.
2. Turn off ordinary taps in the kitchen, bathroom and toilet. Use the water indicator to check fluid movement: if there is no leak, it will remain motionless.
3. Record water meter readings and limit fluid use for a while. If the indicators match, this indicates that the plumbing units are in integrity.
4. Conduct a dye experiment. Pour the powder into the toilet tank: if, after 30 minutes, paint appears on the inner wall of the product, there is a leak in the device. In this case, the water consumption increases by 50 liters per month.
5. When it comes time to pay the bills, each time ask the utility workers if their prices have risen.This way you can make the right decisions about saving water.

The issue of saving water in an apartment and a house has always been relevant. The most expensive are the bathroom and toilet, in second place is the kitchen faucet. Use special nozzles and single-lever mixers, try changing the design of the meter or installing a magnet on it. Arrange with households that from now on, saving water is a priority for you.

Video: how to save water at home